An incident in which a derrick barge crew member sustained first- and second-degree burns on his left wrist when he reached out to grab an oxygen bottle valve, even though he was wearing rigging gloves and a fire-retardant shirt, during the process of decommissioning a platform.
This happened because an oxygen bottle regulator suddenly burst, starting a flash fire while the crew member was turning the valve to supply oxygen for welding. The crewmember’s wounds were treated with burn gel. When dealing with oxygen systems, it is crucial to understand the interconnection of the three elements of the fire triangle: the oxidizing agent (oxygen); system components (valves, regulators, fittings, cylinders etc.) serving as the fuel source; and the interaction among system components to create the potential ignition source.
During the incident, the aluminium regulator attached to the oxygen bottle was directly exposed to the high-pressure environment and a flow of oxygen-rich gas, creating a susceptible chain for potential ignition. Ignition sources in an oxygen system can include:
- Heat: produced at a point of a striking blow.
- Impact: from high velocity particle flow.
- Friction: from two solid materials rubbing together.
- Compression – Expansion Heating: Rapid pressure changes, such as the quick opening of a valve, can lead to compression-expansion heating of gas,
potentially causing ignition.
Therefore, BSEE recommends that operators and their contractors, where appropriate, consider the following:
- Ensuring proper training and awareness of oxygen system safety among all personnel.
- Exercising caution to prevent exposure of skin when handling oxygen bottles and equipment.
- Regularly inspecting and maintaining oxygen system components to identify and address potential issues.
- Following manufacturer guidelines and industry best practices for the safe handling and use of oxygen equipment.
- Maintaining a safe distance from oxygen systems during operations to reduce the risk of exposure to potential ignition sources.
- Using oxygen bottle regulators constructed with brass fittings rather than aluminium. Aluminium easily ignites in high-pressure oxygen, burns rapidly, and
has very high heats of combustion. - Adhering to the following guidelines to ensure safety during valve operations:
- Opening valves slowly: When operating valves, particularly those connected to oxygen systems, always open them slowly. Rapid valve opening can subject passageways to a rapid compression, leading to a rise in temperature and the possibility of ignition.
- Positioning valves away from the operator: Ensuring that valves are positioned away from the operator’s body. This positioning minimizes the risk of exposure to any unexpected release of gases or potential ignition sources.
- Preventing particle introduction: Fast valve opening can introduce particles into the flow path of the regulator. These particles, when released, could ignite large materials within the system. To mitigate this risk, open valves in a controlled manner.
- Ensuring warning labels are in adequate condition and clearly legible on valve regulators as applicable.
- Ensuring oxygen refilling stations, and maintenance areas where oxygen equipment is serviced, are clean and free of dirt, oils, and grease to prevent valves from collecting any residual contaminants.
- Ensuring proper Personnel Protective Equipment (PPE) is always worn during the operation or maintenance of an oxygen regulator, including well-fitting shirt sleeves that will not ride up upon movement.